千家信息网

Arduino 推出新款开发板 GIGA R1 WiFi,提供 76 个 GPIO 引脚

发表于:2026-11-08 作者:千家信息网编辑
千家信息网最后更新 2026年11月08日,感谢CTOnews.com网友 OC_Formula 的线索投递!CTOnews.com 3 月 6 日消息,Arduino 家族又添新成员,其新推出的 GIGA R1 WiFi 开发板基于双核 Ar
千家信息网最后更新 2026年11月08日Arduino 推出新款开发板 GIGA R1 WiFi,提供 76 个 GPIO 引脚
感谢CTOnews.com网友 OC_Formula 的线索投递!

CTOnews.com 3 月 6 日消息,Arduino 家族又添新成员,其新推出的 GIGA R1 WiFi 开发板基于双核 Arm 架构 MCU,外形与现有 Mega 和 Due 相同,尺寸仅 101 x 53 mm,提供 76 个 GPIO 引脚,而且支持无线网络。这是 Arduino 迄今为止最强的开发板,售 72.82 美元(CTOnews.com备注:当前约 503 元人民币)。

这款开发板采用了双核微控制器(480 MHz 的 Cortex-M7 内核和 240 MHz 的 Cortex-M4 内核)STM32H747XI,配备 2MB 闪存 + 1MB 内存,可同时运行两个 Arduino 程序,例如 micropython。

它最高支持 24V 供电(前代 12V),引脚数增加到 76 个(其中 12 个为模拟端口、13 个 PWM、4 个串行端口、3 个 I2C、2 个 SPI、1 个 FDCAN、1 个 SAI),可通过连接外部天线 Murata 1DX 模块实现 Wi -Fi 和低功耗蓝牙连接。

这款开发板具有一个 USB-A 以及一个 USB-C 接口,可用于供电、编程和 HID 功能(即在连接到 PC 时模拟鼠标或键盘),可连接到 U 盘或其他存储设备,也可以外接鼠标或键盘;它还有输入 / 输出 3.5mm 音频插孔、Jtag 连接器(2x5 1.27mm)、20pin 的 Arducam 相机连接器。

  • Microcontroller - STMicro STM32H747XI Cortex-M7 @ 480 MHz + M4 @ 200 MHz MCU with 2MB dual-bank Flash memory, 1 MB RAM, Chrom-ART graphical hardware accelerator

  • System Memory - 8MB SDRAM

  • Storage - 16MB QSPI NOR flash

  • Connectivity - 2.4GHz WiFi 802.11b/g/n up to 65 Mbps and Bluetooth 5.1 BR/EDR/LE via Murata 1DX module

  • Display - 20-pin header (J5)

  • Camera - 20-pin Arducam camera header (J6)

  • USB

    • 1x USB Type-C port for programming and HID

    • 1x USB 2.0 host Type-A port

  • Audio - 3.5mm audio jack

  • I/Os

    • Up to 76x I/O pins (including the camera/display headers)

    • 4x UART, 3x I2C, 2x SPI

    • 12x PWM

    • Up to 12x analog inputs

    • 2x DAC

    • CAN Bus (external transceiver required)

    • VRT (to power the RTC) & OFF (to turn off the board) pins

    • Arduino MEGA headers

    • 3.3V operating voltage

    • 8mA per I/O pin

  • Security - Microchip ATECC608A secure element

  • Debugging - JTAG connector

  • Misc - Reset button, BOOT0 button, RGB LED, power LED

  • Power Supply - 6 to 24V via VIN pin

  • Dimensions - 101 x 53 mm

0