MySQL中slave端Retrieved_Gtid_Set读取改进的示例分析

小编给大家分享一下MySQL中slave端Retrieved_Gtid_Set读取改进的示例分析，相信大部分人都还不怎么了解，因此分享这篇文章给大家参考一下，希望大家阅读完这篇文章后大有收获，下面让我们一起去了解一下吧！

一、问题由来

今天朋友问我这样一个问题@K.I.S.S，在官方文档中有这样一段描述：

When using GTIDs, the slave tells the master which transactions it has already received, executed, or both. To compute this set, it reads the global value of gtid_executed and the value of the Retrieved_gtid_set column from SHOW SLAVE STATUS. The GTID of the last transmitted transaction is included in Retrieved_gtid_set only when the full transaction is received. The slave computes the following set:UNION(@@global.gtid_executed, Retrieved_gtid_set)Prior to MySQL 5.7.5, the GTID of the last transmitted transaction was included in Retrieved_gtid_set even if the transaction was only partially transmitted, and the last received GTID was subtracted from this set. (Bug #17943188) Thus, the slave computed the following set: UNION(@@global.gtid_executed, Retrieved_gtid_set - last_received_GTID)

问为什么要减去last_received_GTID。

二、查看Bug #17943188的commit

对于这个问题我先查看了一下这个bug到底修复了什么问题如下：

 BUG#17943188 SHOW SLAVE STATUS/RETRIEVED_GTID_SET MAY HAVE PARTIAL TRX OR MISS COMPLETE TRX        Problem:    =======        The SHOW SLAVE STATUS command contains the column RETRIEVED_GTID_SET.    This is supposed to contain the set of GTIDs that exist in the relay    log. However, the field is updated when the slave receiver thread    (I/O thread) receives a Gtid_log_event, which happens at the beginning    of the transaction.        If the I/O thread gets disconnected in the middle of a transaction,    RETRIEVED_GTID_SET can contain a GTID for a transaction that is only    partially received in the relay log. This transaction will    subsequently be rolled back, so it is wrong to pretend that the    transaction is there.        Typical fail-over algorithms use RETRIEVED_GTID_SET to determine which    slave has received the most transactions to promote the slave to a    master. This is true for e.g. the mysqlfailover utility.        When RETRIEVED_GTID_SET can contain partially transmitted transactions,    the fail-over utility can choose the wrong slave to promote. This can    lead to data corruption later.        This means that even if semi-sync is enabled, transactions that have    been acknowledged by one slave can be lost.        Fix:    ===        It was implemented a transaction boundaries parser that will give    information about transaction boundaries of an event stream based on    the event types and their queries (when they are Query_log_event).        As events are queued by the I/O thread, it feeds the Master_info    transaction boundary parser. The slave I/O recovery also uses the    transaction parser to determine if a given GTID can be added to the    Retrieved_Gtid_Set or not.        When the event parser is in GTID state because a Gtid_log_event was    queued, the event's GTID isn't added to the retrieved list yet.    It is stored in an auxiliary GTID variable.        After flushing an event into the relay log, the IO thread verifies if the transaction parser is not inside a transaction anymore (meaning    that the last event of the transaction has been flushed).        If transaction parser is outside a transaction, the I/O thread    verifies if a GTID was stored in the start of the transaction, adding    it to the retrieved list, ensuring that all the transaction has arrived and was flushed to the relay log.        Also, before this patch, after the I/O thread flushed a single received    event into the relaylog, it was possible to rotate the relaylog if the    current relaylog file size exceeded max_binlog_size/max_relaylog_size.    After this patch, when GTIDs are enabled we only allow this rotation by    size if the transaction parser is not in the middle of a transaction.        Note: The current patch removed the changes for BUG#17280176, as it also dealt with similar problem in a different way.

大概就是说对于某些I/O线程并没有完整传输的Gtid事物记录到了RETRIEVED_GTID_SET中这会导致比较严重问题，因为某些监控工具根据这个来判断是否切换之类的，因此我们加入了一个事物边界分析器来判断事物是否完整传输，如果完整传输才记录到RETRIEVED_GTID_SET中这是5.7.5过后加入的。总的说来为了进行两个问题的修复：

• 1、最后一个gtid 事物是否完整。

• 2、跨越多个relay log的binlog 得到正确的gtid集合。

三、修改了什么

其实修改得非常多，不一一列举，有兴趣可以自己看看commit 9dab9dad975d09b8f37f33bf3c522d36fdf1d0f9，这里列举几个我看了的地方。

1、在 MYSQL_BIN_LOG::init_gtid_sets加入了如下逻辑

/*      If we use GTIDs and have partial transactions on the relay log,      must check if it ends on next relay log files.      We also need to feed the boundary parser with the rest of the      relay log to put it in the correct state before receiving new      events from the master in the case of GTID auto positioning be      disabled.    */ if (is_relay_log)    { /*        Suppose the following relaylog:         rl-bin.000001 | rl-bin.000002 | rl-bin.000003 | rl-bin-000004        ---------------+---------------+---------------+---------------         PREV_GTIDS    | PREV_GTIDS    | PREV_GTIDS    | PREV_GTIDS         (empty)       | (UUID:1)      | (UUID:1)      | (UUID:1)        ---------------+---------------+---------------+---------------         GTID(UUID:1)  | QUERY(INSERT) | QUERY(INSERT) | XID        ---------------+---------------+---------------+---------------         QUERY(CREATE  |         TABLE t1 ...) |        ---------------+         GTID(UUID:2)  |        ---------------+         QUERY(BEGIN)  |        ---------------+        As it is impossible to determine the current Retrieved_Gtid_Set by only        looking to the PREVIOUS_GTIDS on the last relay log file, and scanning        events on it, we tried to find a relay log file that contains at least        one GTID event during the backwards search.        In the example, we will find a GTID only in rl-bin.000001, as the        UUID:2 transaction was spanned across 4 relay log files.        The transaction spanning can be caused by "FLUSH RELAY LOGS" commands        on slave while it is queuing the transaction.        So, in order to correctly add UUID:2 into Retrieved_Gtid_Set, we need        to parse the relay log starting on the file we found the last GTID        queued to know if the transaction was fully retrieved or not.      */ /*        Adjust the reverse iterator to point to the relaylog file we        need to start parsing, as it was incremented after generating        the relay log file name.      */ rit--;//回退一个文件 因为前面为rit++做操作  exp:1<2<3<{4}<5<6<7  --->   1<2<3<4<{5}<6<7  /* Reset the transaction parser before feeding it with events */ trx_parser->reset();      gtid_partial_trx->clear();      DBUG_PRINT("info", ("Iterating forwards through relay logs, " "updating the Retrieved_Gtid_Set and updating " "IO thread trx parser before start.")); for (it= find(filename_list.begin(), filename_list.end(), *rit);           it != filename_list.end(); it++)//从匹配的位置继续向后 { const char *filename= it->c_str();        DBUG_PRINT("info", ("filename='%s'", filename)); if (read_gtids_and_update_trx_parser_from_relaylog(filename, all_gtids, true, trx_parser,                                                           gtid_partial_trx))        {          error= 1; goto end;        }      }    }  }

其实这一块也说明了解决的什么问题，我们发现一个事物的binlog event 在relay log中是可以跨文件的。而在bin log中是不能跨文件的。仅仅判断最后一个gtid priv event 是不正确的。因此需要这样修改。

2、其次加入了边界分析器Transaction_boundary_parser类

这个类是完全新加入的，这里是其中的一些状态：

num enum_event_boundary_type {    EVENT_BOUNDARY_TYPE_ERROR= -1, /* Gtid_log_event */ EVENT_BOUNDARY_TYPE_GTID= 0, /* Query_log_event(BEGIN), Query_log_event(XA START) */ EVENT_BOUNDARY_TYPE_BEGIN_TRX= 1, /* Xid, Query_log_event(COMMIT), Query_log_event(ROLLBACK), XA_Prepare_log_event */ EVENT_BOUNDARY_TYPE_END_TRX= 2, /* Query_log_event(XA ROLLBACK) */ EVENT_BOUNDARY_TYPE_END_XA_TRX= 3, /* User_var, Intvar and Rand */ EVENT_BOUNDARY_TYPE_PRE_STATEMENT= 4, /*      All other Query_log_events and all other DML events      (Rows, Load_data, etc.)    */ EVENT_BOUNDARY_TYPE_STATEMENT= 5, /*      All non DDL/DML events: Format_desc, Rotate, Incident,      Previous_gtids, Stop, etc.    */ EVENT_BOUNDARY_TYPE_IGNORE= 6 }; /*    Internal states for parsing a stream of events.    DDL has the format:      DDL-1: [GTID]      DDL-2: [User] [Intvar] [Rand]      DDL-3: Query    DML has the format:      DML-1: [GTID]      DML-2: Query(BEGIN)      DML-3: Statements      DML-4: (Query(COMMIT) | Query([XA] ROLLBACK) | Xid | Xa_prepare)  */ enum enum_event_parser_state { /* NONE is set after DDL-3 or DML-4 */ EVENT_PARSER_NONE, /* GTID is set after DDL-1 or DML-1 */ EVENT_PARSER_GTID, /* DDL is set after DDL-2 */ EVENT_PARSER_DDL, /* DML is set after DML-2 */ EVENT_PARSER_DML, /* ERROR is set whenever the above pattern is not followed */ EVENT_PARSER_ERROR  };

3、read_gtids_and_update_trx_parser_from_relaylog函数新增

这个函数是完全新加入的就是为了完成所说的功能，在read_gtids_and_update_trx_parser_from_relaylog中我看到对文件所有event进行了读取，并且用switch进行了不同event类型的处理，但是具体没有细看。但是最后看到对于对于是否加入retrieve gtid的判断如下：

 /*        If we reached the end of a transaction after storing it's GTID        in gtid_partial_trx variable, it is time to add this GTID to the        retrieved_gtids set because the transaction is complete and there is no        need for asking this transaction again.      */ if (trx_parser->is_not_inside_transaction())      { if (!gtid_partial_trx->is_empty())        {          DBUG_PRINT("info", ("Adding Gtid to Retrieved_Gtid_Set as the " "transaction was completed at " "relaylog file '%s': Gtid(%d, %lld).",                              filename, gtid_partial_trx->sidno,                              gtid_partial_trx->gno));          retrieved_gtids->_add_gtid(gtid_partial_trx->sidno,                                     gtid_partial_trx->gno);          gtid_partial_trx->clear();        }      }

四、初始化的时候retrieve gtid到底如何计算

实际上就在现在看来应该就是读取 relay_log的最后一个gtid事物(gtid event或者gtid priv event)同时需要判断此gtid事物是否完整。对于官方文档给出的UNION(@@global.gtid_executed, Retrieved_gtid_set - last_received_GTID)，个人觉得这里的 last_received_GTID应该是经过判断的，如果完整则不减，如果不完整则减去。

以上是"MySQL中slave端Retrieved_Gtid_Set读取改进的示例分析"这篇文章的所有内容，感谢各位的阅读！相信大家都有了一定的了解，希望分享的内容对大家有所帮助，如果还想学习更多知识，欢迎关注行业资讯频道！