Redhat如何配置nagios-安装nagios-plugins

这篇文章将为大家详细讲解有关Redhat如何配置nagios-安装nagios-plugins，小编觉得挺实用的，因此分享给大家做个参考，希望大家阅读完这篇文章后可以有所收获。

安装nagios-plugins

[root@localhost src]# tar zxvf nagios-plugins-1.4.15.tar.gz   [root@localhost nagios-plugins-1.4.15]#./configure --with-nagios-user=nagios --with-nagios-group=nagios --prefix=/usr/local/nagios   [root@localhost nagios-plugins-1.4.15]# make && make install

验证是否安装成功，是否生成如下文件

[root@localhost nagios-plugins-1.4.15]# ls /usr/local/nagios/libexec   check_apt check_disk_smb check_ide_smart check_mrtg check_nwstat check_sensors check_users   check_breeze check_dns check_ifoperstatus check_mrtgtraf check_oracle check_smtp check_wave   check_by_ssh check_dummy check_ifstatus check_nagios check_overcr check_ssh negate   check_clamd check_file_age check_imap check_nntp check_ping check_swap urlize   check_cluster check_flexlm check_ircd check_nt check_pop check_tcp utils.pm   check_dhcp check_ftp check_load check_ntp check_procs check_time utils.sh   check_dig check_http check_log check_ntp_peer check_real check_udp   check_disk check_icmp check_mailq check_ntp_time check_rpc check_ups

配置nagios的WEB接口，也可以通过如下命令更改用户密码，

[root@localhost etc]# /usr/bin/htpasswd -c /usr/local/nagios/etc/htpasswd nagiosadmin   New password:   Re-type new password:   Adding password for user nagiosadmin   [root@localhost etc]# service httpd start   Starting httpd: [ OK ]

编辑httpd.conf，在结尾加上如下内容，保存，启动apache，service httpd restart

ScriptAlias /nagios/cgi-bin /usr/local/nagios/sbin   Options ExecCGI   AllowOverride None   Order allow,deny   Allow from all   AuthName "Nagios Access"   AuthType Basic   AuthUserFile /usr/local/nagios/etc/htpasswd   Require valid-user   Alias /nagios /usr/local/nagios/share   Options None   AllowOverride None   Order allow,deny   Allow from all   AuthName "Nagios Access"   AuthType Basic   AuthUserFile /usr/local/nagios/etc/htpasswd   Require valid-user

设置开机启动nagios服务

[root@localhost nagios-plugins-1.4.15]# chkconfig --add nagios   [root@localhost nagios-plugins-1.4.15]# chkconfig nagios on

验证nagios配置是否正常，此命令以后会经常使用，warning和error为0，表示正常，后面不正常的讨论，这里可以启动nagios服务

[root@localhost nagios-plugins-1.4.15]# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg   ……   Checking misc settings...   Total Warnings: 0   Total Errors: 0   [root@localhost nagios-plugins-1.4.15]# service nagios start   Starting nagios: done.

关于"Redhat如何配置nagios-安装nagios-plugins"这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，使各位可以学到更多知识，如果觉得文章不错，请把它分享出去让更多的人看到。