shall 脚本-DHCP安装和配置

$dhcpscope=read-host -Prompt "请输入dhcp作用域地址"

$scopename=Read-Host -Prompt "请输入dhcp作用域名称"

$scopedescript=Read-Host -Prompt "请输入dhcp作用域的描述"

#获取当前计算机名#
$Hostname=$env:COMPUTERNAME

#获取本机的完全合格域名#
$fqdnname=([system.net.dns]::gethostentry($Hostname)).Hostname

$iprangea=Read-Host -Prompt "请输入dhcp分配起始地址"

$iprangeb=Read-Host -Prompt "请输入dhcp分配结束地址"

$ipexcludea=Read-Host -Prompt "请输入dhcp排除起始地址"

$ipexcludeb=Read-Host -Prompt "请输入dhcp排除结束地址"

$ipgateway=Read-Host -Prompt "请输入dhcp分配的网关地址"

$ipdns=Read-Host -Prompt "请输入dhcp分配的dns地址"

#在windows server 2008中自动安装DHCP服务#
ServerManagercmd -i dhcp

#对DHCP服务启动模式设置为自动#
Get-Service dhcpserver |Set-Service -StartupType automatic

#启动DHCP服务#
Start-Service dhcpserver

#添加地址作用域#
netsh dhcp server add scope $dhcpscope 255.255.255.0 $scopename $scopedescript

#在活动目录中添加DHCP服务授权#
netsh dhcp add server $fqdnname

#添加DHCP服务中的IP地址范围#
netsh dhcp server scope $dhcpscope add iprange $iprangea $iprangeb dhcp

#在分发域中添加排除地址#
netsh dhcp server scope $dhcpscope add excluderange $ipexcludea $ipexcludeb

#在DHCP服务中添加分发网关地址#
netsh dhcp server scope $dhcpscope set optionvalue 003 ipaddress $ipgateway

#在DHCP服务中添加DNS地址#
netsh dhcp server scope $dhcpscope set optionvalue 006 ipaddress $ipdns

#激活DHCP分发域#
netsh dhcp server scope $dhcpscope set state 1