linux如何添加硬盘分区挂载

这篇文章主要介绍了linux如何添加硬盘分区挂载，具有一定借鉴价值，感兴趣的朋友可以参考下，希望大家阅读完这篇文章之后大有收获，下面让小编带着大家一起了解一下。

基本步骤：分区--格式化--挂载--写入文件

1、首先用fdisk -l命令查看添加的硬盘名称，可以看到sdb为新增的硬盘

[root@oracle ~]# fdisk -lDisk /dev/sdb: 21.5 GB, 21474836480 bytes255 heads, 63 sectors/track, 2610 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x00000000Disk /dev/sda: 21.5 GB, 21474836480 bytes255 heads, 63 sectors/track, 2610 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x0006b59cDevice Boot   Start     End   Blocks  Id System/dev/sda1  *      1     39   307200  83 LinuxPartition 1 does not end on cylinder boundary./dev/sda2       39    2358  18631680  83 Linux/dev/sda3      2358    2611   2031616  82 Linux swap / Solaris

2、进行分区，输入m查看提示

[root@oracle ~]# fdisk /dev/sdb Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabelBuilding a new DOS disklabel with disk identifier 0x09f38795.Changes will remain in memory only, until you decide to write them.After that, of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) WARNING: DOS-compatible mode is deprecated. It's strongly recommended to     switch off the mode (command 'c') and change display units to     sectors (command 'u'). Command (m for help): mCommand action  a  toggle a bootable flag  b  edit bsd disklabel  c  toggle the dos compatibility flag  d  delete a partition  l  list known partition types  m  print this menu  n  add a new partition  o  create a new empty DOS partition table  p  print the partition table  q  quit without saving changes  s  create a new empty Sun disklabel  t  change a partition's system id  u  change display/entry units  v  verify the partition table  w  write table to disk and exit  x  extra functionality (experts only)

分析：主要参数的解析

1. 输入 m 显示所有命令列示。

2. 输入 p 显示硬盘分割情形，打印分区表。

3. 输入 a 设定硬盘启动区。

4. 输入 n 创建新的硬盘分割区。

4.1. 输入 e 硬盘为[延伸]分割区(extend)。

4.2. 输入 p 硬盘为[主要]分割区(primary)。

5. 输入 t 改变硬盘分割区属性。　　　　　　　　　　

1. t:分区系统id号

2. L:82:linux swap

3. 83:linux

4. 86：NTFS window分区

6. 输入 d 删除硬盘分割区属性。

7. 输入 q 结束不存入硬盘分割区属性。

8. 输入 w 结束并写入硬盘分割区属性

3、输入n创建新的硬盘分区--输入p创建主分区--输入1设置一个分区--回车--回车（默认全部空间）

Command (m for help): nCommand action  e  extended                                  ···扩展分区  p  primary partition (1-4)                          ···主分区pPartition number (1-4): 1First cylinder (1-2610, default 1): Using default value 1Last cylinder, +cylinders or +size{K,M,G} (1-2610, default 2610): Using default value 2610

4、输入p查看分区情况--输入w保存退出（一定要w保存不然无效）

Command (m for help): p Disk /dev/sdb: 21.5 GB, 21474836480 bytes255 heads, 63 sectors/track, 2610 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x09f38795   Device Boot   Start     End   Blocks  Id System/dev/sdb1        1    2610  20964793+ 83 Linux Command (m for help): wThe partition table has been altered! Calling ioctl() to re-read partition table.Syncing disks.

5、mkfs命令格式化磁盘

[root@oracle ~]# mkfs.ext4 /dev/sdbmkfs.ext4: invalid fragment size - /dev/sdb

6、mount命令挂载分区

[root@oracle ~]# mount /dev/sdb /oracle/You have new mail in /var/spool/mail/root[root@oracle ~]# df -THFilesystem   Type  Size Used Avail Use% Mounted on/dev/sda2   ext4  19G  11G 7.3G 60% /tmpfs     tmpfs 2.1G  74k 2.1G  1% /dev/shm/dev/sda1   ext4  297M  29M 253M 11% /boot/dev/sdb    ext4  22G  47M  20G  1% /oracle

7、添加到/etc/fstab文件下保存退出否则重启后硬盘消失

/dev/sdb    /oracle     ext4  defaults,noatime    0 0

感谢你能够认真阅读完这篇文章，希望小编分享的"linux如何添加硬盘分区挂载"这篇文章对大家有帮助，同时也希望大家多多支持，关注行业资讯频道，更多相关知识等着你来学习!