AIX Study之--AIX网卡配置管理（ent0、en0

AIX Study之--AIX网卡配置管理（ent0、en0、et0）

1、查看AIX系统网卡信息：

[root@aix211 /]#lsdev |grep et

en0        Available 1L-08         Standard Ethernet Network Interfaceen1        Available 14-08         Standard Ethernet Network Interfaceen2        Defined   1D-08         Standard Ethernet Network Interfaceent0       Available 1L-08         10/100 Mbps Ethernet PCI Adapter II (1410ff01)ent1       Available 14-08         10/100 Mbps Ethernet PCI Adapter II (1410ff01)ent2       Available 1D-08         10/100 Mbps Ethernet PCI Adapter II (1410ff01)et0        Defined   1L-08         IEEE 802.3 Ethernet Network Interfaceet1        Defined   14-08         IEEE 802.3 Ethernet Network Interfaceet2        Defined   1D-08         IEEE 802.3 Ethernet Network Interface

由此可以看出：

ent1之类的是物理网卡的设备名，en0或是et0是网络接口名(逻辑上的)，enx(x是一个数字，代表第几块网卡)是标准以太网接口，et0是IEEE 802.3以太网接口。

en0是Ethernet II protocal interface

et0是802.3 protocal interface

ent0是Hardware device interface

2、查看网卡属性：

[root@aix211 /]#lsattr -El en0alias4                      IPv4 Alias including Subnet Mask           Truealias6                      IPv6 Alias including Prefix Length         Truearp           on            Address Resolution Protocol (ARP)          Trueauthority                   Authorized Users                           Truebroadcast                   Broadcast Address                          Truemtu           1500          Maximum IP Packet Size for This Device     Truenetaddr       192.168.8.211 Internet Address                           Truenetaddr6                    IPv6 Internet Address                      Truenetmask       255.255.255.0 Subnet Mask                                Trueprefixlen                   Prefix Length for IPv6 Internet Address    Trueremmtu        576           Maximum IP Packet Size for REMOTE Networks Truerfc1323                     Enable/Disable TCP RFC 1323 Window Scaling Truesecurity      none          Security Level                             Truestate         up            Current Interface Status                   Truetcp_mssdflt                 Set TCP Maximum Segment Size               Truetcp_nodelay                 Enable/Disable TCP_NODELAY Option          Truetcp_recvspace               Set Socket Buffer Space for Receiving      Truetcp_sendspace               Set Socket Buffer Space for Sending        True

[root@aix211 /]#lsattr -El et0alias4             IPv4 Alias including Subnet Mask           Truealias6             IPv6 Alias including Prefix Length         Truearp           on   Address Resolution Protocol (ARP)          Trueauthority          Authorized Users                           Truebroadcast          Broadcast Address                          Truemtu           1492 Maximum IP Packet Size for This Device     Truenetaddr            Internet Address                           Truenetaddr6           IPv6 Internet Address                      Truenetmask            Subnet Mask                                Trueprefixlen          Prefix Length for IPv6 Internet Address    Trueremmtu        576  Maximum IP Packet Size for REMOTE Networks Truerfc1323            Enable/Disable TCP RFC 1323 Window Scaling Truesecurity      none Security Level                             Truestate         down Current Interface Status                   Truetcp_mssdflt        Set TCP Maximum Segment Size               Truetcp_nodelay        Enable/Disable TCP_NODELAY Option          Truetcp_recvspace      Set Socket Buffer Space for Receiving      Truetcp_sendspace      Set Socket Buffer Space for Sending        True

[root@aix211 /]#lsattr -El ent0alt_addr        0x000000000000   Alternate Ethernet Address                    Truebusintr         85               Bus interrupt level                           Falsebusmem          0xc8030000       Bus memory address                            Falsechksum_offload  yes              Enable hardware transmit and receive checksum Trueintr_priority   3                Interrupt priority                            Falseipsec_offload   no               IPsec Offload                                 Truelarge_send      yes              Enable TCP Large Send Offload                 Truemedia_speed     Auto_Negotiation Media Speed                                   Truepoll_link       no               Enable Link Polling                           Truepoll_link_timer 500              Time interval for Link Polling                Truerom_mem         0xc8000000       ROM memory address                            Falserx_hog          1000             RX Descriptors per RX Interrupt               Truerxbuf_pool_sz   1024             Receive Buffer Pool Size                      Truerxdesc_que_sz   512              RX Descriptor Queue Size                      Trueslih_hog        10               Interrupt Events per Interrupt                Truetx_preload      1520             TX Preload Value                              Truetx_que_sz       8192             Software TX Queue Size                        Truetxdesc_que_sz   512              TX Descriptor Queue Size                      Trueuse_alt_addr    no               Enable Alternate Ethernet Address             True[root@aix211 /]#

3、查看网卡配置:

[root@aix211 /]#lscfg -vpl en0[root@aix211 /]#lscfg -vpl et0[root@aix211 /]#lscfg -vpl ent0  ent0             U0.1-P1/E2  10/100 Mbps Ethernet PCI Adapter II (1410ff01)    10/100 Mbps Ethernet PCI Adapter II:        Network Address.............000255CF1406        ROM Level.(alterable).......SCU015        Product Specific.(Z0).......A5204205        Hardware Location Code......U0.1-P1/E2  PLATFORM SPECIFIC  Name:  ethernet    Node:  ethernet@1    Device Type:  network    Physical Location: U0.1-P1/E2

Physical Location的位置可以判断网卡是否是插在PCI接口上的

[root@aix211 /]#lsslot -c pci

# Slot      Description                         Device(s)U0.1-P2-I1  PCI-X capable, 64 bit, 133MHz slot  Empty   U0.1-P2-I2  PCI-X capable, 64 bit, 133MHz slot  Empty   U0.1-P2-I3  PCI-X capable, 64 bit, 133MHz slot  fcs0 U0.1-P2-I4  PCI-X capable, 64 bit, 133MHz slot  Empty   U0.1-P2-I5  PCI-X capable, 64 bit, 133MHz slot  ent2 U0.1-P2-I6  PCI-X capable, 64 bit, 133MHz slot  Empty

[root@aix211 /]#lscfg -vpl ent2

 ent2             U0.1-P2-I5/E1  10/100 Mbps Ethernet PCI Adapter II (1410ff01)      10/100 Mbps Ethernet PCI Adapter II:        Part Number.................09P5023        FRU Number..................09P5023        EC Level....................H10971A        Manufacture ID..............YL1021        Network Address.............000255AF8DAD        ROM Level.(alterable).......SCU004        Product Specific.(Z0).......A5204205        Hardware Location Code......U0.1-P2-I5/E1

--- 可以看出，ent2是插在pci插槽上

物理设备和逻辑设备

1、物理设备是指以某种方式与计算机系统相连的实际硬件。例如显示器、终端、磁带机等。

2、逻辑设备是用户或应用程序访问物理设备的界面，用户或应用程序通过逻辑设备来访问物理设备。

3、在很多情况下，一个物理设备会对应多个逻辑设备

查看物理设备：

[root@aix211 /]#lsdev -Cc adapterent0    Available 1L-08    10/100 Mbps Ethernet PCI Adapter II (1410ff01)ent1    Available 14-08    10/100 Mbps Ethernet PCI Adapter II (1410ff01)ent2    Available 1D-08    10/100 Mbps Ethernet PCI Adapter II (1410ff01)fcs0    Available 1n-08    FC Adapter

查看逻辑设备：

[root@aix211 /]#lsdev -Cc ifen0 Available 1L-08 Standard Ethernet Network Interfaceen1 Available 14-08 Standard Ethernet Network Interfaceen2 Defined   1D-08 Standard Ethernet Network Interfaceet0 Defined   1L-08 IEEE 802.3 Ethernet Network Interfaceet1 Defined   14-08 IEEE 802.3 Ethernet Network Interfaceet2 Defined   1D-08 IEEE 802.3 Ethernet Network Interface